Home, HDB & Condo Rewiring Service

Home, HDB & Condo Rewiring Service Singapore

Compare partial, multi-room and wider property rewiring before approving work. The right electrical rewiring scope depends on confirmed circuit condition, point count, routing and finishing—not property age alone.

Quick answer: what budget should I plan?

Use S$850–S$1,800 for a selected-circuit or one-room planning band, S$1,800–S$3,500 for multi-room work, and S$2,500–S$5,000+ for wider full-flat rewiring. These are non-binding budgeting bands, not fixed offers. Flat size, circuit count, surface or concealed routing, access, DB changes, new points, finishing and agreed testing can move the final quote.

Choose the right route: use this service page for partial or full home, HDB and condo rewiring. Use the electrician cost guide for general electrician price planning, or the HDB wiring upgrade guide for informational checks before deciding scope.

A S$10 fuel surcharge applies to every visit. No additional standard call-out or inspection fee applies. Urgent service or a customer-requested appointment time adds one S$30 fee, subject to technician availability and confirmation. The S$30 is a separate service fee. Pricing terms.

Call +65 9823 7108 WhatsApp Pre-Sales WhatsApp After-Sales

Partial or full rewiring DB + point planning Older HDB / condo units

What this page helps you compare first

Compare a one-circuit repair, selected-room rewiring and wider full-home rewiring before booking a site assessment.
List repeated trips, warm points, damaged cables and planned point changes so safety-critical work can be separated from optional upgrades.
Send your floor plan, DB-box photo, affected rooms and point-change list. We will help separate one-point repair from partial or wider rewiring scope.

Common rewiring service scenarios

These are the common planning situations we see before measurement is booked.

Older HDB safety upgrade

Best for flats where aging wiring and repeated faults are already affecting normal use.

Renovation-linked rewiring

Useful when point additions, concealed routing and carpentry planning are tied together.

Hot points or repeated trips

Good when the same circuit keeps failing and wider cable review is needed.

Scope we usually confirm before quoting

Lock these items earlier and the price range gets easier to set.

Partial rewiring

Targeted upgrade for selected rooms, old circuits or safety-risk zones.

Whole-home rewiring

Useful for older flats where several circuits, DB planning and point positions need review together.

Point additions + routing

Extra sockets, relocated points and practical trunking or concealment planning before work starts.

HDB rewiring cost planning bands

These ranges help set an early budget only. A written quote follows the assessed circuit, point, routing, access and handover scope.

Selected circuit / one room S$850–S$1,800 Planning band for a defined room, circuit or selected-risk zone. It does not automatically include DB replacement, hacking or repainting.

Multi-room electrical upgrade S$1,800–S$3,500 Planning band for several confirmed circuits or rooms. Point additions, longer routes and occupied-home sequencing are itemised.

Wider full-flat rewiring S$2,500–S$5,000+ Planning band where several circuits, cable renewal and renovation coordination are involved. Flat size and the final point schedule matter.

Price boundary: the written quote should state whether materials, DB work, new points, trunking or concealment, testing, labels, access equipment, debris removal and wall or ceiling make-good are included. Anything not listed is excluded until approved in writing.

Partial vs multi-room vs full-flat rewiring

Use the smallest scope that resolves the confirmed condition and supports the planned loads. A larger scope should be evidence-led, not assumed from one symptom.

Quote path	Usually fits	Confirm before approval	Common exclusions to check
Selected circuit / room	One confirmed fixed-wiring route, room or risk zone	Circuit boundary, points affected, route and test scope	Other circuits, DB replacement, hacking and repainting
Multi-room	Several circuits, point changes or staged occupied-home work	Room sequence, shutdowns, point schedule and access	New dedicated loads, concealed finishing and unrelated repairs
Wider full-flat	Multiple ageing circuits or renovation-led cable and point planning	Floor plan, DB/protection scope, all points, testing and labels	Carpentry, plastering, painting and permit or management charges unless listed

Best info to send before quote

Floor plan or room list.
Photos of DB box and affected points.
Notes on repeated trips, hot sockets or dead points.
Whether point additions or concealment work are planned.

HDB rewiring quote process

Describe the symptoms and plan: send the floor plan, DB photo, affected rooms, planned loads and point-change list.
Assess before sizing: separate an appliance, point, breaker or one-circuit fault from a wider fixed-wiring need.
Lock the scope: confirm circuits, points, routing, DB changes, access, testing, finishing exclusions and regulated-work route.
Approve sequencing: record shutdown windows and coordination with ceiling, wall, carpentry or painting work.
Handover the agreed work: check labels, test scope and documents listed in the written quote; any variation needs written approval.

What to confirm before the rewiring quote

These checks reduce scope changes after walls, ceilings or carpentry work begins.

Map the affected circuits

Mark rooms with trips, hot points or dead outlets and send clear DB-box and breaker-label photos.

Choose surface or concealed routes

State which walls and ceilings can be opened, whether trunking is acceptable and when finishing trades are scheduled.

Confirm testing and handover

The written quote should identify the assigned LEW where required and state the testing, labels and handover documents included for the agreed scope.

LEW and handover requirements

EMA says electrical work including wiring, power points, switches, lights and circuit breakers should be carried out or supervised by a Licensed Electrical Worker. FixMove confirms the appropriately licensed route required for the assessed scope before work starts; testing records and other handover documents depend on what the written quote includes.

Read EMA's official guidance on engaging a Licensed Electrical Worker. For protection-device context, see EMA's electrical safety and RCCB guidance. Do not open a DB cover or test live wiring yourself.

Open these when the project expands beyond one room or one trade.

Electrician Singapore Use the broader electrical hub when the scope is still unclear. Electrical inspection & fault assessment Start here when trips, heat or ageing points need a scoped assessment before any wider rewiring decision. Electrician cost guide Compare inspection, point, breaker and installation planning ranges before the rewiring assessment. Electrician near me Use postcode-based booking when a fault needs inspection before the wider scope is known. HDB wiring upgrade guide Review circuit, DB-box and renovation-sequencing questions for an older HDB flat. Power trip electrician Useful when rewiring need starts from repeated breaker trips. Socket repair Open this when the issue still looks like one hot or damaged outlet only. Renovation Singapore Useful when rewiring sits inside a larger renovation or point-shift project. Condo renovation Useful for condo projects where rewiring and management rules intersect.

HDB Rewiring Cost FAQ

How much does HDB rewiring cost in Singapore?

For early budgeting, selected-circuit or one-room work may fall around S$850–S$1,800, multi-room work around S$1,800–S$3,500, and wider full-flat rewiring around S$2,500–S$5,000 or more. These are non-binding planning bands, not fixed quotes. Flat size, circuit count, routing, access, DB work, new points, finishing and testing scope can change the price.

Should I choose partial or full-flat rewiring?

Partial rewiring can suit one confirmed circuit, room or risk zone. Wider rewiring becomes more relevant when several circuits are ageing, many points are changing, or renovation opens walls and ceilings. The choice should follow an assessment rather than flat age alone.

Does every repeated power trip mean the flat needs rewiring?

No. A trip can come from an appliance, one point, moisture, overload, a breaker or fixed wiring. Start with a scoped electrical inspection or fault diagnosis before approving wider rewiring.

What should an HDB rewiring quote include?

Ask for the rooms and circuits covered, point schedule, cable and protection scope, surface or concealed routing, DB changes, testing, labels, finishing exclusions, shutdown sequence, assigned Licensed Electrical Worker where required, and the written variation process.

Who should carry out regulated rewiring work in Singapore?

EMA says electrical work such as wiring, power-point, switch, lighting and circuit-breaker work should be carried out or supervised by a Licensed Electrical Worker. Confirm the appropriately licensed worker for the agreed scope before work starts.

All FixMove services across Singapore

One team for plumbing, electrical, aircon, renovation, customization, handyman, installation and moving — island-wide.

Renovation Kitchen, bathroom, carpentry and home-upgrade planning. Custom Built-ins Wardrobes, cabinets, TV walls and storage-first carpentry. Home Repair & Handyman Drilling, lock replacement, mounting and mixed small works. Plumbing Services Toilet choke, leaking tap, pipe leak and water heater work. Electrical Repair Power trip, socket repair, lighting, fan and point troubleshooting. Aircon Servicing Not cold, leaking, chemical wash, gas checks and repair. Installation Service TV mount, curtains, appliances, racks and lock installation. Moving Service House moving, lorry, packing, dismantling and disposal coordination.