Cost Guide · 2026

Ceiling Fan Repair Singapore — Not Working Fix

Quick answer: ceiling fan not working Singapore

A ceiling fan that will not start is often caused by a failed capacitor, wall regulator, remote receiver, loose wiring or motor fault. Simple repair can start from S$80, while replacement or reinforcement costs more. Send the fan model, ceiling point photo and remote or regulator photo before booking.

A stopped, slow, noisy or unresponsive ceiling fan can involve its capacitor, receiver, controller, motor, mounting or fixed wiring. The symptom helps plan the assessment, but the compatible part and responsible trade must be confirmed before repair.

Diagnosis guide from S$60Slot confirmed before bookingWritten scope and exclusions

Ceiling fan repair prices

Planning ranges depend on diagnosis, compatible parts, access and the responsible trade.

Diagnostic site visitFrom S$60Basic fault assessment; any fee credit must be stated in the written quote.
Capacitor replacementS$80 – S$140Planning range after capacitance, rating and model compatibility are confirmed.
Remote receiverS$120 – S$180Receiver and handset compatibility are checked before a replacement part is quoted.
Switch / wall controllerS$80 – S$150Controller and fixed-wiring scope are separated; regulated work is assigned appropriately where required.
Motor or mounting faultAssessmentMotor condition, bearings, bracket, ceiling support and part availability determine repair versus replacement.

Indicative planning ranges only. Final scope is confirmed after the fault, access and compatible part are assessed.

Quick troubleshooting walkthrough

Use the symptom only to prepare photos and questions. Do not open the canopy or touch a stalled blade while the circuit is energised.

No power at allThe fan is completely dead — no spin, no light, no remote response. First test another point on the same circuit. If the whole circuit is dead, check whether the MCB has tripped in your HDB or condo distribution board and reset it once. If it trips again, or only the fan is dead while other points work, the fault sits in the fan wiring, the isolator, or a failed wall regulator rather than the fan motor itself.
Spins slow or only on highA weak capacitor is one possible cause, but controller, supply and motor faults can produce similar symptoms. Record a short video and the model label; the rating and compatible part must be tested before replacement.
Hums but won't spinSwitch the fan off and do not push the blades while energised. A capacitor, bearing, obstruction or motor fault may be involved, so the safe route is isolation and assessment rather than a live DIY test.
Wobbles or rattlesStop using a severely wobbling fan. Blade balance, screws, down-rod, bracket, ceiling support or bearings may be involved; the mounting condition should be checked before the fan is run again.
Works on cord, not remoteCheck the handset battery and record the model and receiver details. Pairing, handset, receiver or controller faults are possible, and a universal receiver should not be assumed compatible before inspection.
Light works, fan dead (or vice-versa)Independent light and fan circuits mean a split fault. A dead fan with a working light often traces back to the capacitor or the wall regulator; a dead light with a working fan usually means a blown light kit or a faulty switch gang. Each side is wired separately, so one can fail without the other.

Repair or replace — how to decide

Deciding whether to repair or replace depends on the confirmed fault, mounting safety, compatible parts and the combined written cost.

  • Repair when one compatible serviceable part has failed and the motor, mounting, controls and fixed wiring remain suitable.
  • Replace when the motor or mounting is unsafe, compatible parts are unavailable, or multiple faults make the repair quote poor value.
  • Compare in writing by separating diagnosis, part, labour, access, mounting, regulated wiring, testing, disposal and exclusions for both options.

Which path fits your situation

Single serviceable partRepair quoteConfirm the exact compatible capacitor, receiver or controller plus labour and testing.
Motor, mounting or several faultsCompare bothRequest repair and replacement scopes before deciding which has better total value.
New fan selectedInstallation routeCheck fan weight, bracket, ceiling support, controller and any regulated wiring before installation.

What to send for a comparable ceiling fan repair quote

Send the brand and model label, symptom video, fan and canopy photos, remote or regulator, ceiling height, access and whether the light still works. Ask the written quote to separate diagnosis or call-out, compatible part, labour, mounting, regulated wiring, testing, exclusions and the repair-versus-replacement decision.

Get a WhatsApp quote

Send the model label, symptom video, fan and canopy photos, remote or regulator, ceiling height and access details. The written quote states the assessed scope, parts assumptions and exclusions.

WhatsApp Fan Repair Details Call +65 9823 7108 Quote Intake Help

FAQ

What should I send for a ceiling fan repair quote?

Send the brand and model label, a video of the symptom, photos of the fan, canopy, ceiling point, remote or regulator, the fan age if known, ceiling height and whether the light still works. This helps separate a fan-part issue from fixed-wiring or mounting scope.

How do I decide whether to repair or replace the ceiling fan?

Repair is more plausible when one compatible serviceable part has failed and the motor, mounting and other controls remain sound. Replacement is considered when the motor or mounting is unsafe, parts are unavailable, or several faults make repair uneconomic.

What can I check safely before booking?

Use only the normal wall switch or remote and note whether the light or other points on the same circuit work. Switch the fan circuit off and stop using the unit if there is burning smell, heat, repeated tripping, severe wobble or loose mounting. Do not touch blades or open the canopy while energised.

Can an existing ceiling fan remote be reused?

It depends on the receiver, frequency, pairing method and model compatibility. Send photos of both the handset and model label so reuse or replacement can be stated before parts are ordered.

When is a Licensed Electrical Worker required?

Work involving regulated fixed wiring is assigned to an appropriate EMA Licensed Electrical Worker where required. The written scope should distinguish fan-component work, mounting work and any regulated circuit work.

What changes the ceiling fan repair price?

The fault, fan model, compatible-part availability, ceiling height, access, mounting condition, fixed-wiring scope, testing and whether replacement is selected determine the final quote. Published figures are planning ranges, not a diagnosis before inspection.

Related pages

Electrician SingaporeEmergency ElectricianElectrician CostCeiling Fan InstallationCeiling Fan Installation CostPower Trip FixLight Switch Replacement CostHandyman Singapore

Electrical scope and responsible trade

The written quote should separate fan-component work, mounting work and regulated fixed-wiring work. Where an EMA Licensed Electrical Worker is required, confirm the responsible person and licence details before work starts. See licence information.